Dial side
The side with the control dial.
A little project scrapbook ✨
The Gallery
Eight views of the machine, two electrode photos, the Mark VIII schematics, and one unrelated little treasure at the end.
ELECTRA Mark VIII: The Machine ⚡
Exterior views first, then a look inside, ending with the machine powered on.
Exterior views
Opposite side
The exterior from the other side.
Electrode attachment side
Where the electrode connection attaches.
Footswitch attachment side
The side for the footswitch connection.
Inside the machine
Internal view I
A view of the internal circuitry.
Internal view II
The circuitry from another angle.
Internal view III
One more look inside.
Powered on
Switched on
The machine powered on.
The Electrodes
The electrode setup and a closer look at the DIY needle unit.
The electrode lineup
From left to right: return electrode, DIY electrolysis needle unit, and a modified 0.7 mm mechanical pencil used as the needle holder.
Needle unit close-up
The needle unit fitted into its holder.
Mark VIII Schematics
Two schematic images for reference. Click either image to enlarge it.
Schematic I
First schematic image.
Schematic II
Second schematic image.
And one little extra ♡
Unrelated to the project. Here because it matters anyway.
A sketch, just because ♡
Completely unrelated to ELECTRA, but it deserves its own little corner here.